JemmTron Corona Silicone Treater Sleeves

| October 30, 2017

jemmcoWith JemmTron Silicone Corona Treater Sleeves you can:

  • Eliminate the need for costly spare rollers
  • Shrink Costly Maintenance Inventories
  • Replaced In-plant to Reduce Downtime
  • Eliminate expensive two-way shipping costs
  • Eliminate the need for heavy metal roller cores.

Now you can get the high quality silicone corona treater sleeves you would get from your treater O.E.M., without having to pay the high prices.

Test Range Test Standard
Hardness 60 – 70 Shore A ASTM D2240
Specific Gravity 1.16 – 1.24 g/cm3 Electronic analysis
Tensile Strength 6.0 N/mm2 Minimum BS 903/A2
Elongation 250 % Minimum BS 903/A2
Tear Strength 15.0 kN/m Minimum BS 903/A3
Temperature Range -50 up to 200°C
Compression Set % tba BS 903/A6
Color Any
Dielectric Strength 20 kV/mm
Volume Resistivity 1015 Ohm/cm
Dielectric Constant 2.9 – 3.2
Power Factor 0.003
Cure Conditions
Physical properties are measured using a 2.5mm test sheet (6.0mm for hardness), cured under the following conditions: – 5 minutes press cure @ 116+/-5°C. No post cure

Technical Specifications

Jemmco feature a full line of Silicone Corona Treater Sleeves which are designed to provide excellent electrical, thermal and chemical resistance, making them ideal for Corona Treating applications. Produced specifically for corona treating applications, these silicone sleeves are manufactured to extremely tight tolerances, in order to insure reliable and consistent performance.

JemmTron Silicone Corona Treater Sleeves are stocked in a wide range of diameters from 1.5″ to 10.0″, although other custom sizes may be available.

Diameter, Color and Wall Thickness listed below

NOTE:The price listed below represents Price Per Inch.  The quantity represents the number of inches needed. Jemmco will match any competitor’s published prices.

http://www.jemmco.com/p-86-jemmtron-corona-silicone-treater-sleeves.aspx

Print Friendly

Tags:

Category: Featured Products