RSSFeatured Products

Cartridge & Immersion Heaters

Cartridge & Immersion Heaters

| June 12, 2017

Applications include but are not limited to: Compressor Crankcase Heating, Copiers, Dies, Food Processing, Glue Pots, Heat Sealing, Hot Melt Adhesive, Labeling, Medical Equipment, Packaging, Photographic Processing, Plastic Molding, Platens, Wax Pots and Shoe Machinery. Hotwatt manufactures a wide range of cartridge heating units for a variety of applications. The size, sheath, leads, terminals, wattage […]

Continue Reading

Modular Split-a-Part Shredder

Modular Split-a-Part Shredder

| June 5, 2017

Republic Machine’s Modular Split-A-Part Shredder features our patented Zoidal cutting system and smart chamber design which does not allow film or fiber wrapping on the rotor. This greatly reduces frictional heat, minimizes wear and drastically reduces the cost of consumables in high abrasive applications. The Modular Split-A-Part design allows for easy and safe clean out […]

Continue Reading

JemmTron Corona Silicone Treater Sleeves

JemmTron Corona Silicone Treater Sleeves

| June 5, 2017

With JemmTron Silicone Corona Treater Sleeves you can: Eliminate the need for costly spare rollers Shrink Costly Maintenance Inventories Replaced In-plant to Reduce Downtime Eliminate expensive two-way shipping costs Eliminate the need for heavy metal roller cores. Now you can get the high quality silicone corona treater sleeves you would get from your treater O.E.M., […]

Continue Reading

Plastics Recycling Knives

Plastics Recycling Knives

| May 29, 2017

American Cutting Edge supports a wide variety of plastic recyclers from large full-time recyclers to smaller in-house operations utilizing, beside the press or central granulators and shredders. Whether your facility is grinding spurs, bottles, pipe, sheet, bulky shapes, or purgings we can provide the granulator knives or shredder inserts most suitable for your specific application. […]

Continue Reading

Bi-Cutter Screenless Granulators for Sprues and Runners

Bi-Cutter Screenless Granulators for Sprues and Runners

| May 22, 2017

SR68 This press-side screenless granulator will accommodate sprues and runners that have a measurement of less than 6″ x 8″ with presses of 50 tons or less. It produces a 4 x 5mm particle size and up to 12 pounds per hour*. Optional 3 x 5mm cutters are available for this unit. Clean-out, maintenance and […]

Continue Reading

Compounding and Pelletizing

Compounding and Pelletizing

| May 22, 2017

AET’s line of heavy duty compounding and pelletizing extruders, available in all standard sizes, can be supplied to a maximum L/D ratio of 50:1. The longer units allow multiple vent ports and/or side feed ports to be incorporated. They are supplied with custom designed “ADVANEX” feed screws incorporating a variety of mixing sections for superior […]

Continue Reading

Hot Runner Temperature Controllers

Hot Runner Temperature Controllers

| May 15, 2017

With 250,000 control zones installed and a 60% share of the French market, SISE Hot Runner Temperature Controllers have been setting the standard world-wide. When used for production or for preheating, Hot Runner Temperature Controllers ensure the most stable material temperature possible in each injection phase. SISE technology guarantees precise and continuous control of the […]

Continue Reading

STEER’s Patented ‘Fractional-Lobe’ EPZ Technology. Truly Revolutionary. Truly Special.

STEER’s Patented ‘Fractional-Lobe’ EPZ Technology. Truly Revolutionary. Truly Special.

| May 15, 2017

Only STEER’s advanced co-rotating twin-screw platforms are designed using revolutionary, patented ‘fractional-lobe’ special elements. Developed with a thorough understanding of mixing in a co-rotating twin-screw extruder, these special elements are purpose-built to help you overcome difficulties arising in advanced applications. Whether it is higher intake or side-feed capacity, greater forward conveying ability, extensional flow or […]

Continue Reading

Rigid PVC/Flexible PVC Co-Extrusion with Live Hinge and Flex Cap

Rigid PVC/Flexible PVC Co-Extrusion with Live Hinge and Flex Cap

| May 1, 2017

This example of New Jersey Precision Technologies, Inc’s custom plastic extrusion tooling is for a horizontal 2.5″ Davis-Standard plastic extruder with a 1″ Davis-Standard satellite extruder feeding downward from above the main body at a 90° angle. Our engineering department used four-axis wire EDM programming software to create the extrusion profile and we machined the […]

Continue Reading

VAZ 800 Rotary Shredder

VAZ 800 Rotary Shredder

| May 1, 2017

The Vecoplan VAZ 800 Rotary Shredder is designed especially for size reduction of plastics, wood residue, trim blocks, panel scraps, furtniture parts, pallets, dunnage, cardboard and paper, and medical waste. Features Low Speed / High Torque Design Easy Accessibility Tramp Metal Protection Equity “Buyback” Guarantee Low RPM / Low Noise Large Infeed Hopper Precision Hydraulic […]

Continue Reading